Optional       

+Intelligent production management system - MES management, complete the direct management of production equipment in the office , conduct unmanned production data transmission, complete data feedback and production process tracking +Square reinforcement, add inner flange 

+Stud snap bite 

+Muffler production function 

+ C shaped flange 

+ Distal duct processing function(plug)

      FEATURES      

1. The production data input mode can be MES system LAN direct connection mode (optional) or manual input mode. 

2. The right-angle edge is made by a seaming machine, which is more straight and solves the matter that the right-angle edge is less than 90 degrees. 

3. Adopt the double mode of cylinder pushing down material and servo driving up material, optimize the structure and improve the speed.

 4. With anti-slip mark structure design, effectively reduce bottom scratch. 

5. Structural change improves daily production, and the minimum single chip speed is no more than 18 seconds.

 6. Pneumatic pressure arm helps to prevent the loose material of plates above 1.2mm (optional). 

7. The joint (Dongyang bone) is on the small side (front), which is convenient and labor-saving.

      FUNCTIONAL PROCESS      

Uncoiling → film covering → leveling → ribbing → punching sharp mouth, square mouth, middle support hole, flange hole on both sides → length cutting → 1 # feeding platform → 2 right-angle edge lifting seamers → 2 # feeding platform → 2 joint lifting seamers → 3 # conveyor frame → double machine linkage angle steel flange machine, double machine linkage common plate flange (TDF) → manipulator feeding conveyor platform → - square bending forming → discharging

      TECHNICAL INDICATORS      

1. 0.5-2.0mm galvanized sheet, 0.5-1.5mm stainless steel (304) angle steel flange air duct; 0.5-1.5mm galvanized sheet, 0.5-1.2mm stainless steel (304) flange air duct. 

2. With film covering function and welding mode. 

3. With middle support hole and flange hole on both sides. 

4. The daily processing capacity is 2000-4000 square meters.

      BASIC CONFIGURATION      

1. An electric integrated decoiler,include 4pcs of 7 tons coils (optional 8 tons or 10 tons of hydraulic decoiler) 

2. A supporting frame 

3. A main machine 

4. Displacement bite machine 

5. 1 # conveyor 

6. Two T-type independent lifting right-angle edge seaming machines 

7. 1 set of 2 # conveyor 

8. Two T-type independent lifting combined seaming machines 

9. 1 set of 3 # conveyor 

10. One flange machine with two common plates 

11. One double-machine angle steel flange machine 

12. One set of folding platform 

13. One set of control system

      WORK FLOW     

      MAIN TECHNICAL DATA