During the daily use of the common plate flange machine, attention should be paid to the maintenance, which is the guarantee of the long-term stable and reliable operation of the common plate flange machine and the necessary measure to extend the service life. Pay attention to maintenance, which can avoid 80% of unexpected failures.

The user is maintenance work should be carried out according to the relevant introduction in the First Level Maintenance Work of the Common Plate Flange Machine. In many cases, users may consider the maintenance of the common plate flange machine body, and it is easy to neglect the maintenance of accessories.

Here, the editor reminds you that you also need to do a good job in the maintenance of relevant parts. Common plate flange machine accessories can be divided into three types:

① Auxiliary equipment not used temporarily;

② Auxiliary devices required for processing different workpieces, such as clamps, various tools, etc;

③ Some special tools and vulnerable parts for maintenance.

The specific maintenance measures for the accessories of the common plate flange machine are as follows:

1. Like ordinary iron fittings, they are generally coated with anti-rust oil and wrapped with moisture-proof anti-rust paper;

2. In addition to applying anti-rust oil, large spare parts should also be covered with canvas or plastic cloth to prevent dust;

3. All oil pipes and gas pipes must be wrapped with plastic cloth to prevent dust and foreign matters from entering the pipeline, which may cause solenoid valve or other hydraulic and pneumatic components to be blocked during use.

4. Prevent direct sunlight, because many of the electrical spare parts are plastic parts, and the sunlight will make them deformed, brittle and damaged.

5. All spare parts must be inspected regularly to check whether they are rusted and whether there is dust entering to make them dirty. If there is any problem, they must be derusted, oiled and repacked.